|
Go
to ETS Main Page
ETS
Electronic Technical Services Inc.
211 Conchas SE
Albuquerque, NM 87123
Phone: 505-888-3923
Fax: 505-888-3926 Toll Free: 866-700-3923
E-mail: sales1@etsnm.com
Note These devices are only
for use by the US armed forces and other legitimate US based security
forces. Serious
inquiries will be investigated to prove their legitimacy prior to any sales.
Made in U.S.A. |
Fire Sets
Military and Security Training Devices
The Fire Set -M series are wireless field deployable
devices that are used to
capture personnel movement in military training
exercises and security
applications.
|
Remote Controller
Up to 8 “remotes” (not shown) can be
armed, disarmed or fired via this
Remote Controller. External
pyrotechnics or larger strobes and
sirens can be connected to the
remotes (see Stay Behind and
Initiator data sheets).
- Remotely controls up to 8, any
combination of, Stay Behind-
RCs or Initiator-RCs (remotes).
- Remotes can be armed or
disarmed all at once or
individually
- Remotes can be fired all at
once or individually
- On line and armed status
indicators for all remotes
deployed and powered up.
|
Email or Call For Pricing
View detailed
data sheet.
Requires Adobe Acrobat Reader
Click here
for operating instructions
|
Stay Behind-RC
The Stay Behind-RC is a stand
alone, remote controlled,
motion detector based alarm
system and fire only device. It is
assigned to a specific Remote
Controller (see data sheet) for
controlling its operation.
- Remote controlled arm /
disarm and fire operation
- Can be locally armed and
disarmed.
- Exit delay timer for local
(manual)
arming.
Adjustable 2-
60 seconds
delay.
- Alarm timer: adjustable 2-60
seconds delay or “on” until
disarmed or powered down.
- Built-in 30 feet by 45 degree
PIR motion detector.
- 100db, 2 tone, internal Piezo
sounder and yellow alarm
strobe
- Thumb screw / banana
terminals for connecting
pyrotechnics or large strobes
and sirens.
|
Email or Call For Pricing
View detailed
data sheet.
Requires Adobe Acrobat Reader
Click here
for operating instructions
|
Initiator-RC
The Initiator-RC is a stand alone,
remote controlled, fire only device. It
is assigned to a
specific Remote Controller (see
data sheet) for controlling its
operation.
- Remote controlled 12Vdc
output for firing pyrotechnics or
large strobes and sirens.
- Alarm timer: adjustable 2-60
seconds delay or “on” until
disarmed or powered down.
- Thumb screw / banana
terminals for connecting
pyrotechnics or large strobes
and sirens.
|
Email or Call For Pricing
View detailed
data sheet.
Requires Adobe Acrobat Reader
Click here
for operating instructions
|
Stay Behind-M
The Stay
Behind-M is a stand alone, motion
detector based alarm system.
- Can only be locally armed and
disarmed.
- Exit delay timer: adjustable 2-
60 seconds delay.
- Alarm timer: adjustable 2-60
seconds delay or “on” until
disarmed or powered down.
- Built-in 30 feet by 45 degree
PIR type motion detector.
- Loud internal 100db, 2 tone
Piezo sounder and yellow
alarm strobe
- Thumb screw / banana
terminals for connecting
pyrotechnics or large strobes
and sirens.
|
Email or Call For Pricing
View detailed
data sheet.
Requires Adobe Acrobat Reader
Click here
for operating instructions
|
