|
 Go
to ETS Main Page
Go to Audio
Surveillance
Audio Products Main Page
ETS
Electronic Technical Services Inc.
211 Conchas SE
Albuquerque, NM 87123
Phone: 505-888-3923
Fax: 505-888-3926 Toll Free: 866-700-3923
E-mail: sales1@etsnm.com
Made in U.S.A.
Applications for our audio
surveillance products include:
remote monitoring, asset
protection, theft prevention,
national security,
homeland
security, casino soft count rooms, booking rooms,
interrogation rooms
prisons,
sleep disorder centers, therapy
labs, convenience stores, fast food restaurants,
nanny cams,
conference
rooms,
zoos, parking
structures,
elevators, stairwells, industrial
process
monitoring, etc. Any
where
CCTV cameras are
installed,
ETS products can
typically
be
installed.
Caution
It is the responsibility of the installation
company and end user to install this audio
surveillance equipment in compliance
with
state and federal privacy laws. If you are
unfamiliar with these laws, consult a qualified
attorney.
All ETS audio surveillance products contain
warning labels that are to be posted at the
installation site when required
by law (this is
generally all that is required). Upon request,
ETS will supply additional labels free of
charge. |
Sound Surveillance
tm
Monitoring Stations, Listen only and
Listen / Talk Mixer / Switchers
|
Listen only base stations
Switcher / mixers
SM3
SM4
SM8
SM16
Listen / talk back base stations
Switcher / mixers
STW2
STW4
|
Remote controllable
Microphone switcher
SM8-RC
Remote controllable Speaker Switcher / driver
SS8-RC
|
SM3 One way
listen only monitoring station
Stand alone base station for
monitoring any SM1 series
microphone. Terminals for
connecting and powering up any
Sound Surveillance SM1 series
microphone. Connects to DVRs or
tape recorders for live monitoring or
playback. Headphone jack for
private
listening
Includes:
- SM3 base station
- 2 RCA patch cords
- 12VDC AC adapter.
- Installation instructions
Specifications:
- 2 Watt speaker power amplifier
- 3" full range speaker
- 3.5mm headphone jack
- Line level input and output jacks
for connection to DVRs and tape
recorders.
- Recorder monitor switch.
- Volume control
- Power: 12Vdc @ 250ma
- Reverse polarity protected
and fused.
- High quality metal enclosure
- Dimensions:
L5.50 x W4.10 x
H 1.60.
|
Email or Call For Pricing
View detailed
data sheet. Requires
Adobe Acrobat Reader
***View
Installation Instructions***
|
SM4 4 Channel listen only mixer /
switcher monitoring station
Stand alone 4 channel base station
for monitoring 4 SM1 series
microphones. Terminals for
connecting and powering up to 4
Sound Surveillance SM1 series
microphones. Two modes of
operation: Select one of 4 mode or
mix in / out any combination mode.
Connects to DVRs or tape recorders
for live monitoring or playback
Headphone jack for private
listening.
Includes:
- SM4 mixer / switcher base station
- 2 RCA patch cords
- 12VDC AC adapter.
- Installation instructions
Specifications:
- 2 Watt speaker power amplifier
- 3" full range speaker
- 3.5mm headphone jack
- Line level input and output jacks
for connection to DVRs and tape
recorders.
- Recorder monitor switch.
- Level controls for each
microphone.
- In / out switch for each
microphone.
- Two modes of operation: Select
one of 4 mode or mix in / out
any
combination mode.
- Master volume control
- Power: 12Vdc @ 250ma
- Reverse polarity protected
and fused.
- High quality metal enclosure
- Dimensions: L5.50 x W5.50 x H 1.25
|
Email Call or For Pricing
View detailed
data sheet. Requires
Adobe Acrobat Reader
***View
Installation Instructions***
|
SM8 8 Channel
listen only mixer / switcher monitoring station
Stand alone 8 channel base station
for monitoring 8 SM1 series
microphones. Terminals for
connecting and powering up to 8
Sound Surveillance SM1 series
microphones. Two modes of
operation: Select one of 8 mode or
mix in / out any combination mode.
Connects to DVRs or tape recorders
for live monitoring or playback
Headphone jack for private
listening.
Includes:
- SM8 mixer / switcher base
station
- 2 RCA patch cords
- 12VDC AC adapter.
- Installation instructions
Specifications:
- 2 Watt speaker power amplifier
- 3" full range speaker
- 3.5mm headphone jack
- Line level input and output jacks
for connection to DVRs and tape
recorders.
- Recorder monitor switch.
- Level controls for each
microphone.
- In / out switch for each
microphone.
- Two modes of operation: Select
one of 8 mode or mix in / out
any
combination mode.
- Master volume control
- Power: 12Vdc @ 250ma
- Reverse polarity protected
and fused.
- High quality metal enclosure
- Dimensions: L7.90 x W7.10 x H1.25
|
Email or Call For Pricing
View detailed
data sheet. Requires
Adobe Acrobat Reader
***View
Installation Instructions***
|
SM16 16 Channel listen only mixer / switcher base station
Stand alone 16 channel base station
for monitoring 16 SM1 series
microphones. Terminals for
connecting and powering up to 4
Sound Surveillance SM1 series
microphones. Two modes of
operation: Select one of 16 mode or
mix in / out any combination mode.
Connects to DVRs or tape recorders
for live monitoring or playback
Headphone jack for private
listening.
Includes:
- SM16 mixer / switcher base station
- 2 RCA patch cords
- 12VDC AC adapter.
- Installation instructions
Specifications:
- 2 Watt speaker power amplifier
- 3" full range speaker
- 3.5mm headphone jack
- Line level input and output jacks
for connection to DVRs and tape
recorders.
- Recorder monitor switch.
- Level controls for each microphone.
- In / out switch for each
microphone.
- Two modes of operation: Select
one of 4 mode or mix in / out
any
combination mode.
- Master volume control
- Power: 12Vdc @ 250ma
- Reverse polarity protected
and fused.
- High quality metal enclosure
- Dimensions: 7.90L x 7.10 x
H 2.60
|
Email or Call For Pricing
View detailed
data sheet. Requires
Adobe Acrobat Reader
***View
Installation Instructions*** |
STW2 Single Channel listen / talk
back monitoring station
(intercom)
Stand alone single zone, two way,
listen and talk back monitoring
station. Terminals for connecting
a STW1 and STW1-SE speaker /
microphone. DVR / recorder in out
function permits recording and
playback of both sides of
conversations. Built in microphone
with push to talk function.
Includes:
- STW2 base
station
- 2 RCA patch cords
- 12VDC AC adapter.
- Installation instructions
Specifications:
- 2 Watt speaker power amplifier
- 3" full range speaker
- 3.5mm headphone jack
- Line level input and output jacks
for connection to DVRs and tape
recorders.
- Recorder monitor switch.
- Page tone for microphone /
speaker equipped with call
switches.
- Remote speaker volume control.
- 2 Watt 70v line speaker drive
signal.
- Push to talk momentary switch
- Built in talk back microphone.
- Master volume control
- Power: 16Vac @ 250ma
- Reverse polarity protected
and fused.
- High quality metal enclosure
- Dimenstions:
L5.50 x W4.10 x
H 1.60.
|
Email or Call For Pricing
View detailed
data sheet. Requires
Adobe Acrobat Reader
***View
Installation Instructions*** |
STW4 4 Channel
listen / talk back
monitoring station (intercom)
Stand alone 4 zone, two way, listen
and talk back monitoring station.
Terminals for connecting STW1 and
STW1-SE speaker / microphones.
DVR / recorder in out function permits
recording and playback of both sides
of conversations. Built in microphone
with push to talk function.
Includes:
- STW4 base
station
- 2 RCA patch cords
- 12VDC AC adapter.
- Installation instructions
Specifications:
- 2 Watt speaker power amplifier
- 3" full range speaker
- 3.5mm headphone jack
- Line level input and output jacks
for connection to DVRs and tape
recorders.
- Recorder monitor switch.
- Level controls for each
microphone.
- Remote speaker volume
controls.
- 2 Watt 70v line speaker drive
signals.
- Switcher control of up to 4 STW1
zones.
- Page tone and flashing channel
light for microphone / speaker
zones equipped with call
switches.
- Push to talk momentary switch
- Built in talk back microphone.
- Master volume control
- Power: 16Vac @ 500ma
- Reverse polarity protected
and fused.
- High quality metal enclosure
- Dimensions: L7.90 x W7.10 x H1.25
|
Email or Call For Pricing
View detailed
data sheet. Requires
Adobe Acrobat Reader
***View
Installation Instructions*** |
SS8-RC Remote Controllable Speaker Selector
/ Driver
Remote controllable Speaker
selector / 70v line driver for
remote
monitored, two way audio
surveillance systems. The SS8-RC
connects to
video/audio
transmission equipment that uses
telephone, Internet or LAN
mediums. The SS8-RC provides a
solution when the transmission
equipment
lacks a sufficient
number of audio outputs, speaker
drive and switching
capabilities.
Programming is required by the
remote equipment manufacturer
to
control
the SS8-RC. The SS8-RC
accepts a line level
audio input
and
can drive
any
combination
of
speakers
simultaneously. The
SS8-
RC can be
expanded to 16
speaker
zones by
looping
connections from
an
SS8-RC to an
SS16-RC. Simple
ASCII
commands
control the
SS8-
RC and SS16-RC via
RS232. Command List
- 70v line driver for each
speaker. 3 Watts max. per
speaker.
- An LT870 transformer must be
installed at the speaker
location. All
ETS supplied
speakers have a built in
LT870s. See
Speakers
- Level controls for each
speaker. Local speaker
switching mode
for
troubleshooting problems in
the
field.
- Includes: 3’ RCA patch cord,
RS232 patch cord,
and AC
adapter.
Easy cable run termination.
Power: 16VAC @ 3A.Serial port:
RS232 at 2400
Baud 8N1.Dimensions: W 2.75 x L
4.38 x
H 1.56.
|
Email or Call For Pricing
View detailed
data sheet. Requires
Adobe Acrobat Reader
***View
Installation Instructions*** |
SM8-RC Remote Controllable Microphone Switcher
Mixer.
Remote controllable microphone
switcher / mixer for remote
monitored audio surveillance
systems. The SM8-RC connects to
video/audio transmission
equipment that uses telephone,
Internet or LAN
mediums. The
SM8-RC fills a need when the
transmission equipment lacks a
sufficient number of microphone
audio inputs and switching / mixing
capabilities.
Programming is
required by the remote equipment
manufacturer to control
the SM8-
RC. The SM8-RC Powers up to
eight SM1 pre-amplified
microphones and outputs a line
level audio signal. The
SS8-RC
can be expanded to 16 microphone
zones by looping
connections from
an SM8-RC to an
SM16-RC.
Simple ASCII
commands
control
the SM8-RC and SM16-RC via
RS232.
Command List
- Level controls for each
microphone.
- Local microphone switching
mode and built in speaker for
troubleshooting problems in
the
field.
- Includes: 3’ RCA patch cord,
RS232 patch cord,
and AC
adapter.
Easy cable run termination.
Power: 12VDC @ 0.5A.Serial port:
RS232 at 2400
Baud 8N1.Dimensions: W 2.75 x L
4.38 x
H 1.56.
|
Email or Call For Pricing
View detailed
data sheet. Requires
Adobe Acrobat Reader
***View
Installation Instructions*** |
